Warning: This product contains nicotine. Nicotine is an addictive chemical.

A Perfect Beginner’s Guide to Building Coils for Your Disposable Vapes

If you’re a vaper, you may have heard of the term rebuilding or building coils of disposable vapes. This refers to the act of building the coil that goes into your device rather than buying replacements. Looking at building coils from an outside perspective may seem intimidating, but in reality,disposable vapes are quite easy and fun to do. In this guide, we’ll walk you through the process step by step.

Why Build Your Own Disposable Vapes Coils?

Before we dive into the tutorial, let’s understand why building your own disposable vapes coils can be a great idea:

Cost-Effective: Building your coils is cost-effective. The cost of supplies for coils is minuscule compared to buying pre-built coil heads. With supplies, you can last close to a year, depending on how often you change coils.

Longevity: When a coil tastes burnt, it’s usually just the cotton inside that needs changing. By building your disposable vapes coils, you can easily replace the cotton, saving supplies.

Customizable Vaping Experience: With pre-built coil heads, your vaping experience is limited to how they perform. Building your coils allows you to tailor your vape for more flavor, more vapor, or both.

Endless Possibilities: You have the freedom to create any type of coil you prefer, from simple single coils to complex Clapton coils.

Fun and Hobby: Building coils can be a fun hobby. It’s enjoyable to tinker with your vape and fine-tune it to perfection.

The Mirus Bulb10000 Prefilled Pod Kit is a remarkable vaping device that stands out in terms of both performance and flavor delivery. One of its standout features is the utilization of a dual mesh coil, which plays a crucial role in enhancing the overall vaping experience.

What Is a Dual Mesh Coil of Disposable Vape?

A dual mesh coil is a type of heating element used in vaping devices, particularly pod systems and sub-ohm tanks. It consists of two mesh sheets with small holes that are heated simultaneously to vaporize the e-liquid.The advantages of Dual Mesh Coils in the Mirus Bulb10000 Prefilled Pod Kit:

  • Increased Surface Area: Dual mesh coils have a larger surface area, which means they come into direct contact with more e-liquid. This results in faster and more even heating, leading to enhanced vapor production and flavor.
  • Improved Flavor: The increased surface area also allows for better flavor extraction from the e-liquid. Vapers often report that dual mesh coils provide a more pronounced and satisfying flavor profile.
  • Smooth Vapor Production: Dual mesh coils contribute to smoother and denser vapor production. This results in satisfying cloud production without compromising on flavor quality.

Supplies You’ll Need:

  1. An atomizer that supports rebuildable coils.
  2. Resistance wire (Kanthal wire is recommended for beginners).
  3. Cotton for wicking (Cotton Bacon is a popular choice).
  4. Tools like wire cutters, scissors, ceramic tweezers, and mini screwdrivers.

Step-by-Step Coil Building Tutorial:

Prepare the Atomizer: Attach your atomizer to a device (ensure batteries are removed). Remove the tank section to reveal the build deck. Loosen the screws inside the build deck to fit coils under them.

Cut the Wire: Cut about ten centimeters of resistance wire. Use a 2.5mm rod to wrap the wire. Hold one end of the wire and the rod, leaving even space between each wrap. Make around seven wraps, ending in opposite directions.

Install the Coil: Drop the coil into the atomizer between the lead screws. Center the coil and use your thumb and index fingers to secure the coil ends under the screws. Tighten the screws and straighten the coil if needed.

Test the Coil: Attach the atomizer to a device with low wattage (e.g., 12W) and fire the coil. Ensure it glows evenly from the inside out. Adjust using ceramic tweezers if needed.

Wick the Coil: Insert a strand of cotton through the coil, leaving some resistance. Trim excess cotton and tuck it into the pockets on the build deck. Don’t overstuff.

Prime the Coil: Drip a few drops of e-liquid onto the coil to saturate the cotton.

Assemble and Fill: Put everything back together, fill your tank, and you’ve installed your coil.

In summary

the Mirus Bulb10000 Prefilled Pod Kit‘s utilization of dual mesh coil technology significantly enhances its vaping performance. This innovative coil design provides improved flavor, vapor production, and coil longevity, making it a standout choice for vapers seeking a top-tier vaping experience.

Scroll to Top